Radicon Industrial Gearboxes And Geared Motors

Radicon Industrial Geared Motors and Gearboxes are the electro-mechanical drive elements for efficient running dynamic drive systems. Each of our Gear Boxes are assembled in house to with stand the tough industrial and marine applications. With main purpose of action as a power transmission equipment, the gear motor acts to take the motor power reduce its speed and increase the torque it produces.

With completely machined Gears we permit diverse mounting positions to suit the customer’s application. The smooth and efficient running and efficient load bearing capacity of Radicon gearboxes with superior tooth design, our tooth design optimizes LINE TO LINE contact between the revolving surfaces, leading to an efficient gear motor performance. Our Motor Adaptor Mounted Oil seal prevents the damage of the electric motor in case of seal failure. The IEC Standard Motor Flanges allow the end user to swap out a defective Drive motor with a standard one of any brand allowing for efficient repairs and cost savings.

Radicon Gear Boxes are used in a large variety of applications where torque magnification is required such as

  • Conveyors and Material Handling Systems
  • Crane hoisting and Drive Equipment
  • Crushers
  • Mixers and Stirrers
  • Pumps
  • Centrifuges
  • Extruders
  • Feed Screws
  • Turn Tables
  • Pulverizing Machines


The Radicon Gearbox is designed in a three part modular structure to be to be assembled as per the client’s requirements, the enables to have multiple ratios from the standard casings in stock. Radicon Industrial Gearbox is made up of The PG Kit, Gearhead, and Motor Adaptor.

PG Kit

The PG Kit is the heart of the Radicon gearbox and contains a Pinion and a Drive Wheel. We at Ecosmart are a strong supporter of the Kit concept introduced by Radicon which helps to create a vast range of gearbox outputs with an effective inventory.

PG Kit  of the Radicon  gearbox

Gearhead of Radicon Gearbox

The Gearhead keeps all the parts required for the functioning of the gearbox protected from the elements, as well as providing structural support and lubrication for the gears to ensure a long life.

Gearhead  of the Radicon  gearbox

Motor Adaptor

The Motor Adaptor helps attach the motor to the gearbox, a vast sizes of motor adaptors ensures we have the best fit for the motor as per the client application.

Our Gearboxes are designed to be assembled in the following order. Motor Adaptor  of the Radicon  gearbox

Installation Of Reduction Wheel

The reduction wheel is placed into the gearhead (Gearbox) and hammered down using a plastic hammer so as to not damage it. Once pressed firmly it is secured using a circlip to the shaft.

Installation of the reduction wheel

Pressing Of Drive Pinion

The drive pinion which is directly connected to the motor powering the gearbox is pressed into place using a hydraulic press the bearings are protected during the procedure by supporting the bottom.

Pressing Of Drive Pinion

Attachment Of Motor Adaptor

The Gearhead (Gearbox) is filled with oil as per the mounting position a sealant is applied to the mating surfaces of the gearhead and motor adaptor and they are secured in to place with bolts.

Attachment Of Motor Adaptor

Series M In Line Helical Geared Motors And Reducers

Unit Sizes:
01, 02, 03, 04, 05, 06, 07, 08, 09 and more sizes directly from various factories located at various region of world.
Input Power:
Up to 90 Kw
Output Torque:
Up to 11,000 Nm
Gear Ratios:
3.6 /1 to 58/1 in two stage, up to 16,200/1 in combined form
Motor Sizes:
IEC Frames from 63 to 280

Series M In Line Helical Geared Motor

Series K Right Angle Helical Bevel Helical Geared Motors And Reducers

Key dimensions throughout the range are interchangeable with many manufacturers allowing easy installation into existing applications.
Unit Sizes:
03, 04, 05, 06, 07, 08, 09, 10, and 12
Input Power:
Up to 90 Kw
Output Torque:
Up to 12,300 Nm
Gear Ratios:
8.0/1 to 160/1 in three stage, upto 35000/1 in combined form
Motor Sizes:
IEC Frames from 63 to 280

Series K Right Angle Helical Bevel Helical Geared Motor

Series J Shaft Mounted Gear Box

Series J shaft mount geared motor is a very user-friendly unit. It is easy to mount and dismount using our patented Kibo system as well as easy to service on the rare occasions that service is necessary.
Unit Sizes:
11 / 12, 21 / 22, 31 / 32, 51/52, 71/72, 100, 110, 125, 140, 160, 190
Input Power:
Upto 45 Kw
Input Options:
Solid shaft, motor shelf, and hydraulic motor
Output Torque :
Up to 57,800 Nm (512,000 lb.in.)z
Gear Ratios:
5:1, 15:1, 20:1 and 25:1
Output Options:
Hollow shaft - standard, KIBO, shrink disc

Series J Shaft Mounted Gear Box

Series F Parallel Shaft Mount Helical Geared Motors And Reducers

These Gearboxes are available with market leader KIBO tapered bushing system to allow trouble free removal of hollow shaft and gearboxes.
Unit Sizes:
02, 03, 04, 05, 06, 07, 08, 09, 10, 11 and 12
Input Power:
Upto 110 Kw
Output Torque :
Up to 16,500 Nm
Gear Ratios:
5.0/1 to 100/1 in 2 stage, up to 5600/1 in combined form
Motor Sizes :
IEC Frames from 63 to 225

Series F Parallel Shaft Mount Helical Geared Motor

Radicon Gearbox And Geared Motor For Sale in entire UAE, GCC Countries and Middle East

We sell Radicon Gearboxes and Geared Motors to entire UAE, GCC Countries and Middle East. Contact us for the best price.